WELL Building Standard (WELL) points

SOLUTION A: Tunable White

— Available on our BionicPro Series, P3900-4000, 8900-9000, 3600 and, O.
— Melanopic Ratio for BluHue BIOS is on our BioPro SmartSpecs.
— SPD’s are on our specs, also in Excel 5nm increments, available upon request.

SOLUTION B:

— Higher intensity (achievable with most luminaries).

OPTION 1

a. 100% of light is Indirect

— Prudential fixtures with Indirect only options:
BionicPro Linear, Pru1, BoltPro shapes, Zenith

b. Fixture UGR of 16 or lower

—  BioPro3-5 Batwing achieves L04 Glare Control

NOTE: Fixture UGR of 16 or < is difficult to achieve, our BionicPro3-5 with Batwing distribution is one of the few in the industry that can do so.

OPTION 2: Space considerations

a. UGR of 19 or lower within all regular occupied spaces.

— BionicPro Batwing distribution will help achieve this better than most linear luminaires, but this standard requires job-specific Lighting Application studies where this can be measured.

PART 1: Enhanced ColorRendering quality (1 point)

All PRU Fixtures qualify (CRI >90)when ordered with 90+ CRI LEDs

NOTE: TM30 data is available for BionicPro, Snap + BoltProand other fixtures on the last pages of spec sheets.Consult factory if you need excel data.

PART 2: Manage Flicker (2 points)

Option A: Our Standard DM01 drivers are classified as “reduced flicker operation” per California Title 24. 5% or less flicker below 90Hz.
NOTE: BoltPro, HalfSnapPro, SnapPro are CA Title 24 JA8 listed for residential and multi-family use.

Option B: Our Standard DM01 drivers meet recommended practices 1, 2, or 3 as defined by IEEE standard 1789-2015 LED.

LEED® Points

We help customers earn points toward LEED certification by meeting the strictest
criteria in key categories of sustainable building projects, through:

Control Technologies

We’ve partnered with multiple controls manufacturers to provide our customers with wide-ranging sustainability
options including simple sensor integration, PoE, wireless, VLC and other next-generation platforms.

See our SmartSpecs with links to Controls specs for details.